Chinese
What are the castables for cement kiln
  • Time:Apr 21, 2023
  • Views: 5

Castables for cement kilns generally need to have the characteristics of high temperature resistance, chemical corrosion resistance and mechanical strength. The following is the introduction of castables commonly used in cement kilns.
1. High alumina castable
High alumina castable is a castable made of high alumina aggregate, clay, refractory cement and other materials. It has the characteristics of good high temperature resistance, abrasion resistance and corrosion resistance. It is often used in the repair and reconstruction of the baking belt area of cement kiln.
Modern ultrafine powder and low CA cement were used to add high alumina castable, which improved the strength and stability of medium temperature.
2. Lightweight castable
Lightweight castable is generally made of lightweight aggregate (such as perlite, expanded perlite, etc.), cement, additives and other materials mixed, with low density, small thermal conductivity, heat insulation and other characteristics, suitable for the maintenance and reconstruction of cement kiln cooling belt and baking belt.

[英文]高铝质低水泥浇注料(1)
3. Silicate castable
Silicate castable is usually made of Portland cement, Portland aggregate, selected filler and emulsifier mixed, with high temperature resistance, chemical corrosion resistance and other characteristics, suitable for cement kiln baking belt, cooling belt repair and reconstruction.
4. High-speed rail castable
High-speed iron castable is a kind of castable which is composed of electroslag iron, steel slag, refractory material, clay and so on. It has the characteristics of high strength, high corrosion resistance, seepage resistance and so on. It is usually used for the repair and renovation of sintering belt in cement kiln.
It should be noted that when selecting castables for cement kilns, different models and specifications of products should be selected according to the actual situation and use requirements, and adequate testing and evaluation should be carried out before use.

Related products
More Products →

strong hot strength

superior corrosion resistance

high strength

low abrasion

high hot strength

stable monolithic

high thermal shock

high thermal conductivity

related articles
more articles
2023.03.21
      Magnesium oxide aggregate and fine powder account for more than 80% in magnesia castables. During the storage of magnesia raw materials or the p
2023.03.11
      From the aspect of material design, adding components that can effectively limit penetration to the ingredients, such as graphite, SiC, Si2ON, S
2023.02.08
The ambient temperature of the kiln mouth of the cement rotary kiln is high and the fluctuation range is large (1000°C~1400°C): the high-te

Please leave us a message and look forward to knowing your thoughts

Products*

Want an immediate response?

You can consult online or write an email, We deal with your needs immediately

© Zhengzhou Zhenjin Refractory Materials Co.,Ltd.