Chinese
How to dry firebricks for boilers
  • Time:Jun 12, 2023
  • Views: 0

The firebrick for the boiler needs to be dried before use to remove the moisture and other volatile substances inside the brick body, so as to prevent the undesirable phenomenon of the brick body bursting or foaming at high temperature and ensure the normal operation of the boiler. The following is a detailed introduction to the drying of refractory bricks for boilers:

1, Hot air drying method: This method is usually suitable for large-scale industrial boilers. Before drying, the inside of the boiler needs to be cleaned, and then the air is heated to 200℃-300℃, and the hot air is sent into the inside of the boiler through the fan, so that it can achieve the drying effect.

2, Air drying method: This method is suitable for smaller and medium-sized boilers. The inside of the boiler is cleaned first, and then compressed air or dry gas is injected into the brick cracks in order to force the air over the surface of the brick and carry away the moisture and other volatile substances in it.

3, Stage drying method: This method is suitable for large energy-saving boilers. The inside of the boiler is divided into several dry zones, and the temperature and humidity in each zone can be controlled. In the drying process, gradually increase the temperature and reduce the humidity to achieve the final drying effect.

4, Natural drying method: This method is suitable for small boilers. After cleaning the inside of the boiler, place it in a well-ventilated place and let it dry naturally. It should be noted that natural drying takes a long time, and it cannot guarantee that the internal moisture of the brick is completely removed.

Magnesia brick

In short, in the process of drying refractory bricks for boilers, it is necessary to operate in strict accordance with the relevant specifications and requirements to ensure that the drying temperature, humidity, time and other parameters meet the standard requirements, so as not to affect the normal operation of the boiler.

Zhengzhou Zhenjin Refractory Co., Ltd. provides low cost and high performance boiler refractory bricks, including high alumina bricks, silica brick, composite structure silica brick, corundum mullite brick and so on.

Related products
More Products →

Refractoriness under load high

High temperature strength

low density

good corrosion resistance

dense tissue structure

flexibility corrosion

Chromium-free

Environmentally friendly

related articles
more articles
2023.03.16
      Circulating fluidized bed boiler (referred to as CFB boiler) has become a development direction of clean combustion technology due to its advant
2023.01.30
      The main purpose of using refractory wear-resistant materials in circulating fluidized bed boilers is to prevent high temperature oxidation and
2023.01.12
      What should I pay attention to in the construction of the burning belt?       1. Choose the right material.       2. The water-cement ratio mu
2022.11.02
The main purpose of lining the circulating fluidized bed boiler with wear-resistant refractory material is to protect the steel shell of the furnace b
2023.06.12
Lime kiln is a kind of high-temperature equipment, need to use special refractory materials as the lining, lime kiln commonly used some refractory bri
2023.04.21
Alkaline firebricks is an important refractory material, alkaline refractory brick includes a variety of refractory bricks, according to their chemica

Please leave us a message and look forward to knowing your thoughts

Products*

Want an immediate response?

You can consult online or write an email, We deal with your needs immediately

© Zhengzhou Zhenjin Refractory Materials Co.,Ltd.