HX-35 low thermal conductivity, abrasion resistant article

HX-35 low thermal conductivity, abrasion resistant文章

The correct method of loading kiln cars during the firing process of refractory bricks for cement kilns

The firing of refractory materials enters the kiln with the kiln car as the carrier, and the way of loading the kiln car has a huge impact on the f

2023.03.24

The demand ratio of refractory castables and refractory bricks

Relatively speaking, the proportion of demand for refractory bricks and castables is relatively large. However, with the actual situation of nation

2023.03.23

Reason Analysis and Treatment Measures of Long and Thick Kiln Skin at the Kiln Tail of Cement Kiln

Kiln skin, that is, the clinker layer attached to the surface of the kiln lining for firing. It protects the lining of the sintering zone, so that

2023.03.22

Operating principles for the first feeding of the precalciner kiln system

After the refractory material of the firing system is dried, if it is confirmed that it is not necessary to extinguish the internal inspection, it

2023.03.10

Selection of refractory materials for cement rotary kiln cooling belt

In order to reduce the content of tricalcium iron aluminate and tetracalcium iron aluminate (C3AF, C4AF) to promote the crystalline phase transformati

2023.03.06

Selection of Refractory Materials for Burning Belt of Cement Rotary Kiln

The firing zone of cement rotary kiln is the key area for cement to complete the transformation of silicate crystal phase. The sintering temperature

2023.03.03

Selection of Refractory Materials for Cement Rotary Kiln Decomposition Furnace

The high-temperature flue gas at the tail of the cement kiln enters the calciner through the kiln tail smoke chamber, and most of the preheated cement

2023.02.25

Masonry Technical Requirements for Cement Kiln Refractories

A. Quality requirements before laying 1. The remaining materials in the kiln and the removed fire bricks should be cleared, and the cylinder body sho

2023.02.24

Corrosion Principle and Countermeasures of Precalcining Rotary Kiln Shell

Rotary kiln shell corrosion is a common technical problem in precalciner kilns at home and abroad. I. Failure performance Cylinder corrosio

2023.02.22

What are the basic requirements for refractory masonry in the rotary kiln?

Since the rotary kiln is a high-temperature dynamic kiln, it has higher requirements for the masonry of refractory materials. Before building t

2023.02.21

Energy Saving and Consumption Reduction Scheme for Cement Rotary Kiln

In the cement industry, the energy consumed in the cement clinker to sintering production process accounts for more than 80% of the total energy co

2023.02.20

Four indicators that determine the high temperature performance of refractory materials

During the use of refractory materials, they are subjected to physical, chemical, and mechanical effects at high temperatures (generally 1000~1800

2023.02.17

1 2 3 4

Chromite Refractories Furnace lining refractories Refractories for metallurgy High temperature resistant castable Hard fire bricks Furnace bricks universal fire bricks Low Cement Castable Refractory Monolithics Dense Castable